New White Paper from Diversified Plastics, Inc. Explains the Advantages of the Design for Manufacturing Process

June 2  

MINNEAPOLIS—Diversified Plastics, Inc. (DPI), custom plastic-injection molder and additive manufacturer of high-precision components, has released a new white paper titled Design for Manufacturing Yields Better Profits and Shortens Time to Market. This white paper explores how parts intended for plastic-injection molding, simple or complex, can greatly benefit from optimizations found during the design for manufacturing (DfM) process.

To download this white paper, visit www.divplast.com/design-for-manufacturing/.“Working with an experienced plastic-injection molding and tooling production partner during the design phase can streamline the process,” says Mark Gremmels, director of operations of Diversified Plastics, Inc. “DfM helps avoid costly pitfalls and time-consuming iterations, allowing for a quicker time to market.”

This white paper provides information about a few key DfM topics that can offer immediate benefits, including material selection, wall thickness, corner radii, draft angles and mold-flow analysis. It summarizes performance requirement considerations for selecting the right material for a part as well as design techniques to avoid warping, and cosmetic issues. Additionally, it discusses structural strength benefits of optimized wall transitions with sufficient radii. You will also gain an understanding of how mold-flow analysis, performed by subject-matter experts, can proactively address manufacturability problem areas.

Download the white paper by visiting www.divplast.com/design-for-manufacturing/ or for more information, call +1 763.424.2525 or email [email protected].

About Diversified Plastics, Inc.

Employee-owned Diversified Plastics, Inc. (DPI) is a custom plastic-injection molder and digital manufacturer of high-precision, close-tolerance parts and components for medical-device, filtration, aerospace and a variety of other industrial markets. Founded in 1977, the company is a full-service contract manufacturer providing design for manufacturing assistance, additive manufacturing, mold construction and intricate molding as well as cleanroom assembly. In 2018, DPI joined the Carbon Production Network. DPI is ISO 9001:2015 and 13485:2016 certified, FDA registered, ITAR certified and UL registered. www.divplast.com

###

Diversified Plastics, Inc.

8617 Xylon Court North

Minneapolis, MN 55445+1 763.424.2525

[email protected]

www.divplast.com/design-for-manufacturing/

>
Success message!
Warning message!
Error message!